Message #456057

[dub]

Unless there is a hole you just sand it don real good. If it is pitted paint it with a good primer that fills holes. If not just use a good primer. A good sanding and priming are the most important part. Then just paint very light layers and wait about 10-15 minutes between layers of paint until it looks good. I like to then add a couple light layers of clear paint for some depth. Put the stickers on and you are good. If there are holes in the tank then clean out the fuel real real good. Sand it down and weld the holes or use some good metal body filler with a butane tourch. Then paint it. It is all about not getting in a hurry. But gas tanks are easy because they are small and you can take them off.